Raisecom RC953-GESTM1 User Manual

www.raisecom.com
RC953-GESTM1 Commands Notebook

Raisecom RC953-GESTM1 Specifications

General

Device Type	Gateway
Model	RC953-GESTM1
Manufacturer	Raisecom
Weight	3.5 kg
Storage Temperature	-40°C to 70°C
Management	CLI, WEB, SNMP
Power Supply	AC 100-240V
Operating Temperature	-5°C to 55°C
Humidity	5% to 95% (non-condensing)
Ports	1 STM-1 optical port, 4 GE ports (2 GE optical ports, 2 GE electrical ports)

Summary

Chapter 2: System Management Commands

2.3 Config Command

Command to enter the Global configuration mode.

2.4 Device Unlock Command

2.5 Device Lock Command

2.8 Enable Command

Command to log in to Privileged EXEC mode.

2.12 Help Command

2.13 Interface Command

Command to enter interface configuration mode for specific interface types.

2.19 Reboot Command

Command to restart the RC953-GESTM1 device.

2.23 Show Device Command

2.27 Show Version Command

Chapter 3: RC953-GESTM1 User Management Commands

3.1 Password Command

Command to revise the current login password.

3.4 User Command

Command to add new users and set their passwords with encryption options.

3.5 User Privilege Command

Command to revise the privilege level of a specific user.

Chapter 4: Log Management Commands

4.1 Log Enable/Disable/Clear

4.3 Show Log Command

Chapter 5: Network Protocols Configuration

5.1 ARP Add Command

5.3 IP Address Configuration

Configures the IP address for SNMP or VCC interfaces.

5.4 IP Route Configuration

Commands to add or delete static IP routes.

5.6 Ping Command

5.11 SNMP Server Community Configuration

5.15 SNMP Trap Server Configuration

Chapter 6: Upgrade and Configuration File Management

6.1 Download Command

Downloads system-boot or startup-config files from a management server.

6.2 Erase Startup-Config Command

Erases the device's startup configuration file.

6.3 Show Running-Config Command

6.5 Show Startup-Config Command

6.6 Upload Command

Uploads system-boot or startup-config files to a server.

6.7 Write Command

Saves the current running configuration to the initial configuration file.

Chapter 7: Alarming Management Commands

7.1 Alarm Trap Disable Command

7.4 Show Current Alarm Command

Displays the currently active alarms on the device.

7.5 Show History Alarm Command

Chapter 8: Interface Management Commands (SDH)

8.2 Loopback Command (SDH)

Configures local or remote loopback for SDH interfaces.

8.15 Show SDH APS Command

8.18 Show Interface SDH Command

Chapter 9: Management Commands (E1)

9.4 Clock Mode Command (E1)

Sets the clock mode for E1 interfaces (master or slave).

9.7 Interface E1 Command

Enters interface configuration mode for E1 interfaces.

9.13 Show Interface E1 Command

Chapter 10: Virtual-Channel Commands

10.5 Show Virtual-Channel Command

10.8 Virtual-Channel Command

Sets up a virtual channel, including VC12, E1, index, and name.

Chapter 11: Interface Management Commands (GE)

Flow-Control Command

11.5 Rate-Limit Command

Limits the ingress and egress rate and burst speed on GE interfaces.

11.9 Show Interface GE Command

11.10 Shutdown Command (GE)

Shuts down or enables Ethernet interfaces.

Chapter 12: Remote Device Management (RC953-GESTM1)

12.1 Remote RIC Command

Enters the remote interface device configuration mode.

12.2 Show Remote RIC Command

12.3 Show Remote Interface RIC E1

12.4 Show Remote Interface RIC ETH

Chapter 13: Device Management (Remote RC952-FEE1)

13.1 Device Name Command

13.2 Device Type Command

13.4 Interface Command

Enters interface configuration mode for remote devices.

13.5 Reset Command (Remote Device)

Resets a remote interface device.

13.6 Show Device Command

Chapter 14: E1 Interface Configuration (Remote RC952-FEE1)

14.1 Clock Mode Command (E1)

Sets the E1 clock mode to master or slave.

14.3 Interface Command

Enters interface configuration mode for ETH interfaces.

14.4 Show Interface Command

Chapter 15: E1 Interface Configuration (Remote RC952-FEE1)

15.2 Flow-Control Command

15.3 Interface Command (E1)

Enters interface configuration mode for E1 interfaces.

15.4 Show Interface Command

15.5 Shutdown Command (ETH)

Shuts down or enables Ethernet interfaces.

15.6 Speed Duplex Command

Sets the speed and duplex mode for physical interfaces.

Chapter 16: Device Management (Remote RC952-FXE1)

16.1 Device Name Command

16.2 Device Type Command

16.3 Interface Command

Enters interface configuration mode for remote devices.

16.4 Reset Command (Remote Device)

Resets a remote interface device.

16.5 Show Device Command

Chapter 17: E1 Interface Configuration (Remote RC952-FXE1)

17.1 Clock Mode Command (E1)

Sets the E1 clock mode to master or slave.

17.3 Interface Command (FX-ETH)

Enters interface configuration mode for FX-ETH interfaces.

17.4 Show Interface Command

Chapter 18: FX Interface Configuration (Remote RC952-FXE1)

18.1 Flow-Control Command

18.2 Interface Command (E1)

Enters interface configuration mode for E1 interfaces.

18.3 Show Interface Command

Chapter 20: Device Management (Remote RC953-FE8E1)

20.1 Device Name Command

20.2 Device Type Command

20.5 Interface E1 Command

Enters interface configuration mode for E1 interfaces.

20.6 Interface ETH Command

Enters interface configuration mode for ETH interfaces.

20.7 Reset Command (Remote Device)

Resets a remote interface device.

20.8 Show Device Command

Chapter 21: E1 Interface Configuration (Remote RC953-FE8E1)

21.1 Clock Mode Command (E1)

Sets the E1 clock mode to master or slave.

21.3 Interface E1 Command

Enters interface configuration mode for E1 interfaces.

21.4 Interface ETH Command

Enters interface configuration mode for ETH interfaces.

21.5 Show Interface Command

Chapter 22: ETH Interface Configuration (Remote RC953-FE8E1)

22.2 Flow-Control Command

22.3 Interface E1 Command

Enters interface configuration mode for E1 interfaces.

22.4 Show Interface Command

22.5 Shutdown Command (ETH)

Shuts down or enables Ethernet interfaces.

22.6 Speed Duplex Command

Sets the speed and duplex mode for physical interfaces.

Chapter 23: Device Management (Remote RC953-FX8E1)

23.1 Device Name Command

23.2 Device Type Command

23.4 Interface E1 Command

Enters interface configuration mode for E1 interfaces.

23.5 Interface FX-ETH Command

Enters interface configuration mode for FX-ETH interfaces.

23.6 Reset Command (Remote Device)

Resets a remote interface device.

23.7 Show Device Command

Chapter 24: E1 Interface Configuration (Remote RC953-FX8E1)

24.1 Clock Mode Command (E1)

Sets the E1 clock mode to master or slave.

24.3 Interface E1 Command

Enters interface configuration mode for E1 interfaces.

24.4 Interface FX-ETH Command

Enters interface configuration mode for FX-ETH interfaces.

24.5 Show Interface Command

Chapter 25: FX Interface Configuration (Remote RC953-FX8E1)

25.1 Flow-Control Command

25.2 Interface E1 Command

Enters interface configuration mode for E1 interfaces.

25.3 Show Interface Command

Chapter 26: Device Management (Remote RC953-FE4E1)

26.1 Device Name Command

26.2 Device Type Command

26.5 Interface E1 Command

Enters interface configuration mode for E1 interfaces.

26.6 Interface ETH Command

Enters interface configuration mode for ETH interfaces.

26.7 Reset Command (Remote Device)

Resets a remote interface device.

26.8 Show Device Command

Chapter 27: E1 Interface Configuration (Remote RC953-FE4E1)

27.1 Clock Mode Command (E1)

Sets the E1 clock mode to master or slave.

27.3 Interface E1 Command

Enters interface configuration mode for E1 interfaces.

27.4 Interface ETH Command

Enters interface configuration mode for ETH interfaces.

27.5 Show Interface Command

Chapter 28: ETH Interface Configuration (Remote RC953-FE4E1)

28.2 Flow-Control Command

28.3 Interface E1 Command

Enters interface configuration mode for E1 interfaces.

28.4 Show Interface Command

28.5 Shutdown Command (ETH)

Shuts down or enables Ethernet interfaces.

28.6 Speed Duplex Command

Sets the speed and duplex mode for physical interfaces.

Chapter 29: Device Management (Remote RC953-FX4E1)

29.1 Device Name Command

29.2 Device Type Command

29.4 Interface E1 Command

Enters interface configuration mode for E1 interfaces.

29.5 Interface FX-ETH Command

Enters interface configuration mode for FX-ETH interfaces.

29.6 Reset Command (Remote Device)

Resets a remote interface device.

29.7 Show Device Command

Chapter 30: E1 Interface Configuration (Remote RC953-FX4E1)

30.1 Clock Mode Command (E1)

Sets the E1 clock mode to master or slave.

30.3 Interface E1 Command

Enters interface configuration mode for E1 interfaces.

30.4 Interface FX-ETH Command

Enters interface configuration mode for FX-ETH interfaces.

30.5 Show Interface Command

Chapter 31: FX Interface Configuration (Remote RC953-FX4E1)

31.1 Flow-Control Command

31.2 Interface E1 Command

Enters interface configuration mode for E1 interfaces.

31.3 Show Interface Command

Chapter 32: Device Management (Remote RC954-FE4E1)

32.1 Device Name Command

32.2 Device Type Command

32.5 Interface E1 Command

Enters interface configuration mode for E1 interfaces.

32.6 Interface ETH Command

Enters interface configuration mode for ETH interfaces.

32.7 Reset Command (Remote Device)

Resets a remote interface device.

32.8 Show Device Command

Chapter 33: E1 Interface Configuration (Remote RC954-FE4E1)

33.1 Clock Mode Command (E1)

Sets the E1 clock mode to master or slave.

33.3 Interface E1 Command

Enters interface configuration mode for E1 interfaces.

33.4 Interface ETH Command

Enters interface configuration mode for ETH interfaces.

33.5 Show Interface Command

Chapter 34: ETH Interface Configuration (Remote RC954-FE4E1)

34.2 Flow-Control Command

34.3 Interface E1 Command

Enters interface configuration mode for E1 interfaces.

34.4 Show Interface Command

34.5 Shutdown Command (ETH)

Shuts down or enables Ethernet interfaces.

34.6 Speed Duplex Command

Sets the speed and duplex mode for physical interfaces.

Chapter 35: Device Management (Remote RC954-FX4E1)

35.1 Device Name Command

35.2 Device Type Command

35.4 Interface E1 Command

Enters interface configuration mode for E1 interfaces.

35.5 Interface FX-ETH Command

Enters interface configuration mode for FX-ETH interfaces.

35.6 Reset Command (Remote Device)

Resets a remote interface device.

35.7 Show Device Command

Chapter 36: E1 Interface Configuration (Remote RC954-FX4E1)

36.1 Clock Mode Command (E1)

Sets the E1 clock mode to master or slave.

36.3 Interface E1 Command

Enters interface configuration mode for E1 interfaces.

36.4 Interface FX-ETH Command

Enters interface configuration mode for FX-ETH interfaces.

36.5 Show Interface Command

Chapter 37: FX Interface Configuration (Remote RC954-FX4E1)

37.1 Flow-Control Command

37.2 Interface E1 Command

Enters interface configuration mode for E1 interfaces.

37.3 Show Interface Command