Raisecom RC953-GESTM1 - Sdh Tuais-Insert

www.raisecom.com User Manual
76
[Command mode]
Privileged EXEC mode, Global configuration mode
[Application Example]
RC953-GESTM1
# show sdh aps timeslot
timeslot switch-status activeline switch-counter restore-left
1 auto working 0 60
2 auto working 0 60
3 auto working 0 60
4 auto working 0 60
5 auto working 0 60
6 auto working 0 60
7 auto working 0 60
[Relevant Commands]
Command Description
show sdh aps
Show the protection
sdh aps-restore-time <1-12> Set sdh aps-restore-time.
sdh force-switch (work-line|protection-line|clear) timeslot TSSTRING Set force-switch.
8.17 sdh tuais-insert
[Command Format]
sdh tuais-insert (sectiontim|linesd|pathsd|pathplm|pathtim) (enable|disable)
[Function]
Configure if inset the AIS alarming when there is the alarm.
[Parameter]
(sectiontim|linesd|pathsd|pathplm|pathtim): alarming style.
(enable|disable): enable or disable.
[Default]
disable.
[Command mode]
Interface configuration mode.
[Application Example]
RC953-GESTM1# config
RC953-GESTM1(config)# interface sdh 1
RC953-GESTM1(config-sdh/1)# sdh tuais-insert sectiontim enable