Raisecom RC953-GESTM1 - 8.15 Show SDH APS Command

www.raisecom.com User Manual
75
8.15 show sdh aps
[Command Format]
show sdh aps
[Function]
show sdh aps.
[Parameter]
N/A
[Default]
N/A
[Command mode]
Privileged EXEC mode, Global configuration mode
[Application Example]
RC953-GESTM1# show sdh aps
sdh protect switch is :enable.
sdh protect switch type is :path.
sdh protect switch mode is :1+1.
sdh aps restore waittime is:10 minutes
[Relevant Commands]
Command Description
show sdh aps timeslot TSSTRING Show the protection hyper information of
timeslot.
sdh aps-restore-time <1-12> Set the time of protection hyper.
sdh force-switch (work-line|protection-line|clear)
timeslot TSSTRING
Set the force switch.
8.16 show sdh aps timeslot
[Command Format]
show sdh aps timeslot TSSTRING
[Function]
Show sdh aps timeslot TSSTRING.
[Parameter]
N/A
[Default]
N/A