Raisecom RC953-GESTM1 - 3.5 User Privilege Command

www.raisecom.com User Manual
35
RC953-GESTM1# user abc password no-encrypt 123
Delete a user whose usename is abc.
RC953-GESTM1# no user abc.
[Relevant Commands]
Command Description
hostname
Set the hostname name of the privileged user.
user privilege
Revised the privileged level of the user.
Password
Revise the current user password.
3.5 user privilege
[Command Format]
user USERNAME privilege (administrant|normal|limited)
[Function]
Revise the user privilege level.
[Parameter]
USERNAME: username
(administrant|normal|limited): user level
[Default]
The Default privilege is ADMINISTRANT
[Command mode]
Privileged EXEC mode
[Instructions]
When hope to restrict one user privilege, don’t allow him to execute some command, we can use this
command to restrict the other users. This command only can be executed by the controller whose
privilege is ADMINISTRANT.
[Command Execute Echo]
Set successfully !
please execute "write" to save!
Show the information that the privilege of the specific user is correct.
You Need higher priority!
Indicate the current lading user level is not asministrant, it can’t revise the other users privileges.
[Application Example]
Set the privilege of the user abd as normal.