www.raisecom.com User Manual
81
RC953-GESTM1# config
RC953-GESTM1(config)# interface e1 1
RC953-GESTM1(config-e1/1)# clock-mode slave
Set successfully
9.5 crc-auto
[Command Format]
crc-auto {enable|disable}
[Function]
CRC is enable or disable of the framed E1.
[Default]
disable
[Command mode]
Interface configuration mode.
[Instructions]
Useless under clarity mode.
[Command Execute Echo]
N/A
[Application Example]
RC953-GESTM1# config
RC953-GESTM1(config)# interface e1 1
RC953-GESTM1(config-e1/1)# crc-auto enable
Set successfully
9.6 frame
[Command Format]
frame
[Function]
Set the E1 framed mode.
[Parameter]
N/A
[Default]
N/A
[Command mode]
Interface configuration mode.
To Next Page
