Raisecom RC953-GESTM1 - 21.3 Interface E1 Command; 21.4 Interface ETH Command

www.raisecom.com User Manual
131
RC953-GESTM1(config)# remote ric 1
RC953-GESTM1(config-RC953FE8E1/1)#
interface e1 1
RC953-GESTM1(config-RC953FE8E1/1-e1/1)#
crc-auto enable
Set successfully.
21.3 interface e1
[Command Format]
interface e1 <1-8>
[Function]
Interface configuration mode.
[Default]
N/A
[Command mode]
Remote protocol configuration mode, remote protocol e1 or eth interface mode.
[Application Example]
RC953-GESTM1(config-RC953FE8E1/1-e1/1)
# interface e1 4
RC953-GESTM1(config-RC953FE8E1/1-e1/4)#
21.4 interface eth
[Command Format]
interface eth
[Function]
Enter the interface configuration mode.
[Default]
N/A
[Command mode]
Remote protocol configuration mode, remote protocol e1 interface mode.
[Application Example]
RC953-GESTM1(config-RC953FE8E1/1-e1/1)
# interface eth
RC953-GESTM1(config-RC953FE8E1/1-eth/1)#
21.5 show interface
[Command Format]
show interface