Raisecom RC953-GESTM1 - 21.5 Show Interface Command

www.raisecom.com User Manual
132
[Function]
Show the remote protocol device e1 interface configuration mode.
[Default]
N/A
[Command mode]
Remote device configuration mode, remote device of E1Interface configuration mode.
[Application Example]
Show the e1 interface configuration information of remote protocol device that the index number is 1.
RC953-GESTM1(config-RC953FE8E1/1-e1/1)# show interface
E1 1 config current
clock-mode master master
crc-autonegotiation enable enable
frame-mode unframe
Port enable enable
crc enable disable
Port status normal
tx packets 0
rx packets 0
rx error packets 0