Raisecom RC953-GESTM1 - Show Interface VCC; Virtual-Channel

www.raisecom.com User Manual
53
Autonegotiation : enable
5.19 show interface vcc
[Command Format]
show interface vcc
[Function]
Show vcc network interface.
[Parameter]
N/A
[Default]
N/A
[Command mode]
Privileged mode, vcc interface configuration mode.
[Application Example]
RC953-GESTM1(config-vcc)# show interface vcc
VccIndex IPAddress Netmask VirtualChannel
1 192.168.5.28 255.255.0.0 6 RC953-GESTM1(config-vcc)#
5.20 virtual-channel
[Command Format]
virtual-channel <1-63>
[Function]
Appointed vitual-channel accordance with the vcc network, the appointed virtual channel should be the
setup virtual-channel, and not the community of any GE port, the inner virtual-channel port No. should
from 17 to 32.
[Default]
N/A
[Command mode]
vcc interface configuration mode.
[Application Example]
RC953-GESTM1(config-vcc)# virtual-channel 6
set vcc virtual channel success.