Raisecom RC953-GESTM1 - Alarm-Trap-Disable Sdh

www.raisecom.com User Manual
63
[Parameter]
ALARMNO:
[Default]
N/A
[Command mode]
Global configuration mode
[Command Execute Echo]
Set successfully !
Information showed when set the alarm-trap-disable successfully!
[Application Example]
RC953-GESTM1# alarm-trap-disable index 203
Set successfully
[Relevant Commands]
Command Description
show alarmindex
Show alarming index.
7.3 alarm-trap-disable sdh
[Command Format]
alarm-trap-disable sdh (section|line|path|tu|vc)
no alarm-trap-disable sdh (section|line|path|tu|vc)
[Function]
Configure the alarming information of SDH, use no command to cancel the alarm-trap-disable.
[Parameter]
(section|line|path|tu|vc):
[Default]
N/A
[Command mode]
Global configuration mode
[Command Execute Echo]
Set successfully !
Information showed when set the alarm-trap-disable is successfully.
[Application Example]
RC953-GESTM1# alarm-trap-disable sdh section
Set successfully