Raisecom RC953-GESTM1 - 9.13 Show Interface E1 Command; 11.9 Show Interface GE Command

www.raisecom.com User Manual
87
9.13 show interface e1
[Command Format]
show interface e1 [<1-32>]
[Function]
Show the interface condition and detailed statistics information.
[Parameter]
E1 interface number: it will indicate all the condition and information of e1 interface.
[Default]
N/A
[Command mode]
Privileged mode, Interface configuration mode.
[Application Example]
RC953-GESTM1
# show interface e1 1
Description:e1port-1 send code:NRZ
remote deviceID:1 remote E1ID:1
e1 Loopback: none
corresponding timeslot: 1-1
E1 interconnection mode: disable
E1 frame mode: framed
E1 bert Enable: disabled
E1 crc Enable: disabled
E1 clock mode: master
corresponding ts:1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31
rx packets: 0
tx packets: 0
rx error packets: 0
9.14 timeslot
[Command Format]
timeslot TSSTRING
no timeslot TSSTRING
[Function]
Set the framed e1 slave speed, no timeslot delete the timeslot of the salve speed.
[Parameter]
TSSTRING: timeslot tsstring needed to be operated, “,” devide the single timelot, “-” period.
Eg 1,3-5 means timelots 1,3,4,5.