Setting Name Description
Navigation Next Turn-by-Turn Displayed in Cluster This setting will display navigation prompts in the Instrument Cluster Display.
Phone Pop-ups Displayed In Cluster This setting will display incoming calls in the Instrument Cluster Display.
Fuel Saver Display This setting will enable fuel saver mode in the Instrument Cluster Display.
Ready To Drive Pop-ups This setting will enable the Ready To Drive Pop-ups in the Instrument Cluster Display.
Show Main Category Bar Labels This setting will allow you to turn the bottom main category bar labels on or off.
My Profile
When the My Profile button is pressed on the touchscreen, the system displays options related to the vehicle’s profiles.
NOTE:
Depending on the vehicle’s options, feature settings may vary.
Setting Name Description
Language This setting will change the language of the Uconnect system and Instrument Cluster Display for some langauges. The
available languages are Português Brasileiro, Deutsch, English, Español, Français, Italiano, Nederlands, Polski, Türk,
Pусский, and Arabic.
Display Mode
This setting will adjust the display brightness for the radio to “Auto” or “Manual”. “Manual” allows for more customization
with the radio display brightness.
Display Brightness Headlights On/Display Bright-
ness Nighttime
This setting will allow you to set the brightness when the headlights are on. To access this setting, Display Mode must be
set to “Manual”, the headlights must be on, and the dimmer wheel must be in the lowest position. The “+” setting will
increase the brightness; the “-” will decrease the brightness.
Display Brightness Headlights Off/Display Bright-
ness Daytime
This setting will allow you to set the brightness when the headlights are off. To access this setting, Display Mode must be
set to “Manual”. The “+” setting will increase the brightness; the “-” will decrease the brightness.
Set Theme This setting will allow you to change the display theme.
MULTIMEDIA 177
5
To Next Page
Loading...
