POWER MIRRORS — IF EQUIPPED
The controls for the power mirrors are located on the
driver's door trim panel.
The power mirror controls consist of mirror select but-
tons and a four-way mirror control switch.
To adjust a mirror, push either the L (left) or R (right)
button to select the mirror that you want to adjust.
Using the mirror control switch, push on any of the four
arrows for the direction that you want the mirror to
move.
POWER FOLDING OUTSIDE
MIRRORS — IF EQUIPPED
The power folding mirrors can be folded rearward and
unfolded into the normal driving position.
The switch for the power folding mirrors is located
between the power mirror switches L (left) and R (right).
Push the switch once and the mirrors will fold in, push
the switch a second time and the mirrors will return to
the normal driving position.
If the mirror is manually folded after a powered cycle, a
potential extra button push is required to get the mir-
rors back to the normal driving position. If the mirror
does not fold automatically, check for ice or dirt buildup
at the pivot area, which can cause excessive drag.
Resetting The Power Folding Outside Mirrors
You may need to reset the power folding mirrors if the
following occurs:
•
The mirrors are accidentally blocked while folding.
•
The mirrors are accidentally manually folded/
unfolded (by hand or by pushing the power folding
mirror switch).
•
The mirrors come out of the unfolded position.
•
The mirrors shake and vibrate at normal driving
speeds.
To reset the power folding mirrors: Fold and unfold
them by pushing the button (this may require multiple
attempts). This resets them to their normal driving
position.
Power Mirror Controls
1 — Left Mirror Selection
2 — Mirror Direction Control
3 — Right Mirror Selection
Power Mirror Movement Power Folding Mirror Switch
GETTING TO KNOW YOUR VEHICLE 39
2
To Next Page
Loading...
