Lap/Shoulder Belt Systems For
Installing Child Restraints In This Vehicle
Frequently Asked Questions About Installing Child Restraints With Seat Belts
What is the weight limit (child’s weight + weight of the child restraint)
for using the Tether Anchor with the seat belt to attach a forward-
facing child restraint?
Weight limit of the Child Restraint
Always use the tether anchor when using the seat belt to install a
forward-facing child restraint, up to the recommended weight limit of
the child restraint.
Can the rear-facing child restraint touch the back of the front pas-
senger seat?
Yes
Contact between the front passenger seat and the child restraint is
allowed, if the child restraint manufacturer also allows contact.
Can the rear head restraints be removed? Yes
The head restraints can be removed in every rear seating position if
they interfere with the installation of the child restraint
page 32.
Can the buckle stalk be twisted to tighten the seat belt against the
belt path of the child restraint?
Yes – Cinching Latch Plate
No – ALR
In positions with cinching latch plates (CINCH), the buckle stalk may
be twisted up to 3 full turns. Do not twist the buckle stalk in a seat-
ing position with an ALR retractor.
Regular Cab Automatic Locking Retractor (ALR) Locations
ALR — Switchable Automatic Locking Retractor
Top Tether Anchorage Symbol
Mega Cab/Crew Cab Automatic Locking Retractor (ALR)
Locations
Cinching Latch plate — Cinching Latch plate
ALR — Switchable Automatic Locking Retractor
Top Tether Anchorage Symbol
240 SAFETY
To Next Page
Loading...
