REAR LAMP BAR ID MARKER (DUAL REAR
WHEELS) — IF EQUIPPED
See the following steps to replace:
1. Loosen the two screws and the housing to gain
access to the bulb sockets.
2. Turn the socket a quarter turn counterclockwise to
access the bulb.
3. Pull the bulb straight out from the socket.
4. Reverse the procedure for installation of the bulbs
and housing.
SIDE MARKER LAMPS (DUAL REAR WHEELS)
— IF EQUIPPED
See the following steps to replace:
1. Push rearward on the side marker lamp assembly.
2. Pull the entire assembly from the fender.
3. Turn the socket a quarter turn counterclockwise and
remove from assembly to access the bulb.
4. Pull the bulb straight out from socket.
5. Reverse the procedure for installation of the bulbs
and housing.
TIRES
TIRE SAFETY INFORMATION
Tire safety information will cover aspects of the follow-
ing information: Tire Pressures and Tire Loading.
Tire Markings
Screw Locations
Side Marker Lamp Locations
Tire Markings
1 — US DOT Safety Standards Code
(TIN)
2 — Size Designation
3 — Service Description
4 — Maximum Load
5 — Maximum Pressure
6 — Treadwear, Traction and Tempera-
ture Grades
290 SERVICING AND MAINTENANCE
To Next Page
Loading...
