Faceplate
The blower speed increases as you turn the blower con-
trol knob clockwise from the lowest blower setting. The
blower speed decreases as you turn the blower control
knob counterclockwise.
Touchscreen
Use the small blower icon to reduce the blower setting
and the large blower icon to increase the blower set-
ting. Blower can also be selected by pressing the blower
bar area between the icons.
Mode Control
Select Mode by pressing one of the mode
buttons on the touchscreen, or pushing the
MODE button on the faceplate, to change
the airflow distribution mode. The airflow
distribution mode can be adjusted so air comes from
the instrument panel outlets, floor outlets, defrost out-
lets, and demist outlets.
Faceplate
Push the MODE button to change the airflow distribu-
tion mode.
Touchscreen
Press one of the mode buttons to change the airflow
distribution mode. The airflow distribution mode can be
adjusted so air comes from the instrument panel out-
lets, floor outlets, defrost outlets and demist outlets.
Panel Mode
Air comes from the outlets in the instrument
panel. Each of these outlets can be individu-
ally adjusted to direct the flow of air. The air
vanes of the center outlets and outboard
outlets can be moved up and down or side to side to
regulate airflow direction. There is a shut-off wheel
located below the air vanes to shut off or adjust the
amount of airflow from these outlets.
Bi-Level Mode
Air comes from the instrument panel outlets
and floor outlets. A slight amount of air is
directed through the defrost and side win-
dow demister outlets.
NOTE:
Bi-Level mode is designed under comfort conditions to
provide cooler air out of the panel outlets and warmer
air from the floor outlets.
Floor Mode
Air comes from the floor outlets. A slight
amount of air is directed through the defrost
and side window demister outlets.
Mix Mode
Air is directed through the floor, defrost, and
side window demister outlets. This setting
works best in cold or snowy conditions that
require extra heat to the windshield. This
setting is good for maintaining comfort while reducing
moisture on the windshield.
Climate Control OFF Button
Press and release the OFF button on the
touchscreen, or push the OFF button on the
faceplate (if equipped) to turn the Climate
Control system on/off.
MANUAL CLIMATE CONTROL
DESCRIPTIONS AND FUNCTIONS
MAX A/C Setting
Set the temperature control knob to the MAX
A/C setting to change the current setting to
the coldest output of air. Moving the tem-
perature control knob away from the MAX
A/C setting causes the MAX A/C operation to exit.
Uconnect 5 With 8.4-inch Display Manual Temperature
Controls
50 GETTING TO KNOW YOUR VEHICLE
To Next Page
Loading...
