Frequently Asked Questions About Installing Child Restraints With LATCH
What is the weight limit (child’s weight + weight of the child restraint)
for using the LATCH anchorage system to attach the child restraint?
65 lb (29.5 kg)
Use the LATCH anchorage system until the combined weight of the
child and the child restraint is 65 lb (29.5 kg). Use the seat belt and
tether anchor instead of the LATCH system once the combined
weight is more than 65 lb (29.5 kg).
Can the LATCH anchorages and the seat belt be used together to
attach a rear-facing or forward-facing child restraint?
No
Do not use the seat belt when you use the LATCH anchorage system
to attach a rear-facing or forward-facing child restraint.
Booster seats may be attached to the LATCH anchorages if allowed
by the booster seat manufacturer. See your booster seat owner’s
manual for more information.
Can a child seat be installed in the center position using the inner
LATCH lower anchorages from the outboard seating positions?
N/A – Regular Cab/Mega Cab/
Crew Cab Split Bench
No – Crew Cab Full Bench rear
seat
Regular Cab Front / Crew Cab with full bench rear seat: Use the seat
belt and tether anchor to install a child seat in the center seating
position.
Crew Cab with split bench rear seat / Mega Cab: Child restraints can
be installed using the supplied lower anchorages for the center seat-
ing position.
Crew Cab 60/40 Split Bench LATCH Positions
Top Tether Anchorage Symbol
Lower Anchorage Symbol (2 Anchorages Per Seat-
ing Position)
Mega Cab LATCH Positions
Top Tether Anchorage Symbol
Lower Anchorage Symbol (2 Anchorages Per Seat-
ing Position)
Crew Cab Full Bench LATCH Positions
Top Tether Anchorage Symbol
Lower Anchorage Symbol (2 Anchorages Per Seat-
ing Position)
236 SAFETY
To Next Page
Loading...
