What does HC Power Alarm mean on Raven Sidekick Pro?
If you're seeing an 'HC Power Alarm' on your Raven Farm Equipment, the injection node is not connected to high current power. Verify that the high current breaker is not tripped and check the battery connections.
What causes a Low Limit Alarm on Raven Sidekick Pro Farm Equipment?
If you encounter a 'Low Limit Alarm' on your Raven Farm Equipment, the implement speed or width is insufficient to maintain the pump rate, and the pump “low limit” rate has become active. To address this: * Increase vehicle speed. * The pump will maintain the programmed low limit rate. If this rate is the desired lowest injection rate, no action is required. * If the current field operation requires a lower rate of injection, reduce the programmed low limit setting to allow the pump to reduce the rate of injection. Refer to the console or field computer operation manual for additional information on the low limit feature.
What does PSI Error Code 101 mean on my Raven Water Pump?
If your Raven Water Pump is displaying PSI Error Code 101, it indicates that the transducer is out of calibration or is faulty. You should recalibrate the pressure transducer. If the problem persists, replace the pressure transducer.
What to do if I get a Max PSI/Low PSI Code 104 error on my Raven Water Pump?
To address a Raven Water Pump error related to clogged or restricted pump outlet supply lines, low injection pressure, or incorrect tubing size, first check for any blockages in the outlet supply lines and flush the system to remove clogs. Ensure the correct size of injection outlet tubing is being used. Also, verify that all hand valves are open to allow flow. If the issue persists, consider replacing the pressure transducer.
Why is my Raven Water Pump showing Code 107?
If your Raven Water Pump displays Code 107, it could be due to a clogged pump strainer, restrictions in tubing or plumbing, or the chemical being too thick. Clean the pump strainer and check for obstructions in the injection line. Verify the correct size of injection supply tubing is used. If the chemical is too thick, dilute it in the chemical supply tank, as some chemicals are not suitable for direct injection systems.
What does Code 110 mean on my Raven Water Pump?
If your Raven Water Pump is showing error Code 110, it may be due to no power to the pump motor or a pump motor/encoder issue. First, verify that the high current LED on the injection pump node is lit. Then, check the motor and encoder connections, ensuring they are properly seated. If the connections appear solid, return the pump to a local Raven dealer for service.
What does Motor/Encoder Code 105 mean on my Raven Water Pump?
If your Raven Water Pump is displaying error code 105 related to the motor or encoder, it may be due to no power to the pump motor or a pump motor/encoder issue. First, verify that the high current LED on the injection pump node is lit. Then, check the motor and encoder connections, ensuring they are properly seated. If the connections appear solid, return the pump to a local Raven dealer for service.
How to fix Code 108 on a Raven Water Pump?
To resolve a Raven Water Pump issue with Code 108, which indicates clogged or restricted pump outlet supply lines, incorrect tubing size, a faulty PSI transducer, a closed hand valve, or low injection pressure, check for any restrictions or blockages in the outlet supply lines and flush the injection system. Verify the proper size of the injection outlet tubing is used. Ensure hand valves are open to allow flow from the injection pump outlet port.
What causes Flow Error Code 102 on a Raven Water Pump?
If your Raven Water Pump displays Flow Error Code 102, it could be due to a flow obstruction in the valve, an empty tank or faulty intake hose, or a faulty flow switch. Perform a pump calibration test; if it fails, remove the pump cartridge and clear any obstructions. Check the chemical supply tank and plumbing, fixing any leaks or refilling the product. Ensure the flow switch is working correctly; if not, check connections or replace it. If the flow switch functions properly, return the node to a local Raven dealer for service.
What does Code 101 mean on my Raven Water Pump and how do I fix it?
If your Raven Water Pump is showing Code 101, it could mean the left transducer is out of calibration or is faulty. Recalibrate the pressure transducers. If that doesn't work, replace the left pressure transducer.
General| Category | Farm Equipment |
|---|---|
| ISOBUS Compatibility | Yes |
| Display | Touchscreen |
| Connectivity | Wi-Fi, Bluetooth |
| Battery Life | Up to 10 hours |
Guidelines for safe handling and application of agricultural chemicals.
Precautions for safe electrical connections and system operation.
Instructions for safely routing electrical harnesses on the machine.
Instructions for safely routing fluid carrying hoses on the machine.
Describes the purpose and function of the Raven Sidekick Pro injection system.
Lists the main components that make up the injection system.
Lists essential components and tools needed for system installation.
Information on software/documentation updates and providing feedback.
Steps to prepare the machine and system before physical installation.
Detailed steps for installing the pump and fill station components.
Instructions for mounting tank support brackets to the machine.
Steps for installing the chemical mixer and its associated plumbing.
Guide for connecting and routing electrical harnesses and components.
Instructions for applying operational decals to system components.
Explains how to operate the valves for chemical tanks.
Describes how to operate the fill station valves.
Details on operating single and dual pump valves.
Instructions for operating recirculation valves for single and dual pumps.
Initial configuration of the Raven OS and system sections.
Details on Product, Injection, Pressure, Section, and Alarm settings tabs.
Procedures for priming and calibrating the Sidekick Pro injection pump.
Process for re-addressing rate controllers on the CAN bus.
Configuring the display to match system settings and equipment.
Configuration of alarm settings for the sprayer or floater control system.
Procedure to calibrate all pressure transducers in the sprayer control system.
Procedure for remote closed-system calibration of the injection pump.
Interpreting LED status indicators on the Sidekick Pro motor control node.
Lists common error codes, their possible causes, and solutions.
List of part numbers for pumps, switches, sensors, and cables.
List of part numbers for mixers, tanks, valves, strainers, and fittings.
Part numbers for support brackets, templates, and operation labels.
Diagram showing electrical connections and component layout.
Diagram illustrating the fluid path and component connections.
To Next Page
