Raycus XZ Series User Manual

Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL-C20000TZ
71
8.13.2 Check Waveform Content
To check the programming contents in the current laser programming mode is as Figure 54. The
program automatically lists the original programmings by click the programming number that needs to be
checked.
Figure 54 Programming content interface in the current laser programming mode
8.13.3 Empty all Waveforms
Empty all programming interfaces stored in the current laser programming mode is as Figure 55. All
programmings stored inside the current laser. will emptied by click ‘Empty Program List’.
Figure 55 Interface of empty all programming stored in the current laser programming mode

Raycus XZ Series Specifications

General

Brand	Raycus
Model	XZ Series
Category	Measuring Instruments
Language	English