Raycus XZ Series User Manual

Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL-C20000TZ
39
⑨ XP1-A1is high level, XP1-A3 is low level or suspending;
⑩ XP1-A1 is high level, XP1-A8~A14 is not all low level;
⑪ Emit laser: Send "EMON" by communication, or
click button on the PC software
Turn off the laser: Send "EMOFF" by communication, or
click button on the PC software;
⑫ Emit red light: Send "ABN" by communication, or click button on the PC
software
Turn off red light: Send "ABF" by communication, or click button on the PC
software;
⑬ The communication sends "SDC XX" to set the power percentage, XX represents the power
percentage, or click button on the PC software.
5.1 ON Mode
In the On mode, the user can send commands to set different working mode through PC
software or direct communication. After the laser is powered on again, the mode before power failure
will be memorized.

Raycus XZ Series Specifications

General

Brand	Raycus
Model	XZ Series
Category	Measuring Instruments
Language	English