Raymarine hsb2 - Page 106

Chapter 5: Standard Chart Operations 5-7
Displaying Object
Information
Nearest
➤ To obtain the information for the nearest port facility:
1. Move the cursor to the required position – this can be anywhere on the chart
and may be over an object – then press
ENTER
to display the object infor-
mation pop-up.
2. Press the
NEAREST
soft key. The port facility symbols are displayed.
3. Use the trackpad to highlight the required facility, then press
ENTER
.
4. The nearest ports providing that facility are listed with distance and bearing
to the port.
If you highlight a port name then press
ENTER
, details for that facility are
displayed. Typical port data is shown in Figure 5-4.
Press
CLEAR
to return to the port list.
Press
CLEAR
to return to the facility symbols.
5. Press
CLEAR
to return to the default display.
Figure 5-4: Nearest Port - Typical Data
D4255_1