5-24 HSB Series Color LCD Display
Follow a Route
➤ To access the Goto/Follow soft keys, press the default soft key
GOTO
(the soft
keys differ if a follow or goto is already in progress):
Follow a Route
Note:
The current route may have been created on this display, or created on
another unit and received on this display via SeaTalk.
If a route has been reversed or if a route on screen was being followed but
stopped before completion, the target waypoint – outlined by a square box –
may be different to when the route was created.
You should always check the target waypoint before initiating a follow
route.
➤ To follow the current route:
1. Press the
GOTO
default soft key. The Goto/Follow soft keys are displayed.
2. Press the
FOLLOW ROUTE
soft key.
Alternatively, to follow a route:
1. Place the cursor over a route leg until the letters
RTE
and the route soft keys
are displayed then press
FOLLOW ROUTE
.
Your vessel’s current position becomes the origin, and the target waypoint in
the current route becomes the active target.
The soft keys change as follows:
These options are described in the following sections.
➤ To follow the current route in reverse:
1. Press the
ROUTE
default soft key, followed by
MORE
. The route soft keys are
displayed.
2. Press the
REVERSE ROUTE
soft key. The current route is reversed on the
screen. Press
ENTER
or
CLEAR
.
3. Press the
GOTO
default soft key. The Goto/Follow soft keys are displayed.
4. Press the
FOLLOW ROUTE
soft key.
The soft keys change as follows:
GOTO
D4171-1
GOTO
CURSOR
FOLLOW
ROUTE
GOTO
WAYPOINT
GOTO
FOLLOW
ROUTE
RTE
FOLLOW
ROUTE
D4251_1
CLEAR
ROUTE
REVERSE
ROUTE
EDIT
ROUTE
STOP
FOLLOW
ROUTE
REVERSE
ROUTE
GOTO
FOLLOW
ROUTE
To Next Page
Loading...
