Raymarine hsb2 - Clearing the Current Route

Chapter 5: Standard Chart Operations 5-17
Clearing the
Current Route
Figure 5-5: Save Route Window
4. If you do not wish to name or re-name the route, press the
NO
soft key to
clear the list. The route is saved and is listed as Route Not Named.
If you wish to name the route press the
YES
soft key. Use the trackpad to
move the cursor right or left to the character you wish to edit. Then use the
top or bottom of the trackpad to increase or decrease the letter or number.
5. Press ENTER to finish and clear the Name List, or press CLEAR to cancel
the operation. To return to the default soft key display, press ENTER again.
Clearing the Current Route
You can clear the current route from the screen. When you select
CLEAR ROUTE
if the current route has not been saved, you have the option of saving it and, if
you are following the current route, you have the option to stop.
➤ To clear the current route:
1. Press the
ROUTE
default soft key or place the cursor over a route leg until the
text
RTE
is displayed.
Press the
CLEAR ROUTE
soft key.
2. If you are following the current route the
STOP FOLLOW
soft keys are dis-
played.
To cancel the
CLEAR
operation press
NO
.
To stop following and clear the route press
YES
.
SAVE ROUTE
1 EMPTY
2 EMPTY
3 EMPTY
4 EMPTY
5 EMPTY
YES NO
NAME ROUTE?
D4155-1
ROUTE
RTE
STOP
FOLLOW