Raymarine hsb2 - 6.6 GPS Setup

6-8 HSB Series Color LCD Display
GPS Setup
6.6 GPS Setup
GPS set up page provides you with information and the status of the tracked
navigation satellites for a SeaTalk GPS. It also enables you to
SET UP
a SeaTalk
Differential GPS, by manually retuning it to a different differential beacon.
Note: The satellite information is not available when you use an NMEA GPS.
➤ To select GPS Set Up:
1. Press
MENU
, then press the
GPS SETUP...
soft key.
The Navigation Status pop-up window shown in Figure 6-4. This window
provides, for each tracked satellite, the satellite number, its signal strength,
azimuth angle and elevation angle from your vessel.
Figure 6-4: Navigation Status Window
➤ To tune a differential SeaTalk GPS to another beacon:
1. Press
D-GPS SETUP
, the Differential GPS Setup pop-up is displayed with
MODE
and
BEACON SELECT
soft keys.
2. Press
MODE AUTO MAN
to toggle the GPS to manual tuning.
3. Press
BEACON SELECT
, use the soft keys to set the required beacon fre-
quency and bit rate.
The status of the selected beacon is displayed in the pop-up.
Press
ENTER
to select the beacon and return to the Navigation Status win-
dow, then
ENTER
to return to the
MENU
soft keys.
Note: Under normal circumstances
RESTART GPS
is not required.
MENU
GPS
SETUP!
NAVIGATION STATUS
SAT
D4281-1
SIGNAL
STATUS
AZ
ELEV
03
31
21
23
22
19
17
27
16
15
IN USE
IN USE
IN USE
IN USE
IN USE
IN USE
IN USE
STATUS
STATUS
STATUS
085
292
127
075
174
290
056
321
024
237
085
051
048
043
028
014
012
011
005
065
RESTART
GPS
D-GPS
SETUP!
FIX STATUS
FIX
HDOP
1
GPS
SETUP!