Raymarine hsb2 - Page 119

5-20 HSB Series Color LCD Display
Displaying Route
Information
The Route Information pop-up is displayed. As illustrated in Figure 5-7,
this lists the waypoints in the route and details bearing, length of each leg,
total distance, and either the estimated time of arrival (ETA) or the elapsed
time.
The soft keys allow you to toggle between ETA or total (elapsed) time, and
to change the Speed Over Ground (SOG) value used in the time calcula-
tions. The current selections are highlighted.
➤ To change the SOG used for ETA calculations:
1. Press one of the
PLANNED SOG
keys to switch from actual to planned SOG.
2. Press the up or down
PLANNED SOG
keys to change the planned SOG value.
The Time values in the Route Information list are updated.
3. Press the
ACTUAL SOG
key to use the actual SOG value rather than a
planned one.
Figure 5-7: Route Information Window
4. Press ENTER to remove the Route Information window, then ENTER or
CLEAR to return to the route soft keys.
5. To return to the default soft key display, press ENTER.
PLANNED SOG
0.0kn
TIME
ETA TOTAL
ACTUAL
SOG
1.0kn
INFO FOR ROUTE-CURRENT ROUTE
WPT POSITION BRG DISTANCE TOTAL TIME
°T nm nm ETA
01 50°21^97N --- 0.0 0.0 --:--
001°15^80W
02 50°21^97N 090 4.4 4.4 --:--
001°08^75W
03 50°27^48N 000 5.5 10.0 --:--
001°08^75W
D4264-1