1-10 HSB Series Color LCD Display
Pathfinder Radar
Options
RadarFunctions
.
The HSB Series Pathfinder Radar includes the following functions:
• Choice of range scales from
1
/
8
nm to 72nm (dependent on scanner type).
• Automatic and manual control of tuning, gain and sea clutter.
• Two Variable Range Markers (VRMs) and Electronic Bearing Lines
(EBLs), allowing target range and bearing measurements.
VRM/EBLs can be floated.
• Target wakes and target expansion mode.
• Two guard zones with alarms.
• Add marks to record important or dangerous locations.
• Man Overboard (MOB) to navigate back to a person or object.
In addition, the 10.4" LCD display provides:
• 10 Target MARPA
Operation of these radar functions is described in Chapter 3 and Chapter 4.
If you have an integrated system with a 10.4" Color LCD or 10" CRT Dis-
play, MARPA functionality is available on the repeater display provided:
• The 10.4" LCD/10" CRT display is the radar master, i.e. it is connected to
the radar scanner.
• The repeater display is connected via HSB.
• The repeater display has the appropriate software version:
7" CRT display version 5.05 or higher
7" LCD display version 6.05 or higher
If the software version is lower it will require an upgrade, please contact
your authorised Raytheon dealer for details.
GST
AUTO
IR
RC
FTC
FTC
EX
126°T
13:48:06
5.7kts
14.4m
6.3kts
3nm
RR
BRG
RNG
R
nm
CURSOR
COG
SOG
TIME
SPEED
DEPTH
WPT
1/2
50°49^13N
203°
T 1.20nm
01h:30m
001°12^09W
H-UP
POSITION
063°
1.65
120@T
Waypoint data box, showing
range, bearing and time to go
Mark, symbol selected using
setup options
Long target wake (short,
medium or long wakes can
be selected)
D3601-1
Data boxes, showing data
(if available) in the selected
units
Mark, default symbol
Active waypoint - from Chartplotter
Offset centre
To Next Page
Loading...
