Raymarine hsb2 - Page 43

2-12 HSB Series Color LCD Display
Selecting the Mode
of Operation
Soft Key Labels:
nge when you press a key.
lt soft key labels are shown.
Chartplotter
t
ion and the slider values.
o
wn to move the cursor faster.
n
progress and returns to the
n
ction under cursor control.
n
d (if appropriate) clears current soft
r
performs the selected task, accepts
more options.
d
isplayed, takes cursor control
u
rsor symbol is displayed, drops the
c
ontrol.
n
, or slider.
you press soft/dedicated key.
t
ext indicate that pressing soft key
play of soft key options.
unit beeps to turn on display.
t
o turn off display.
Press soft key to display required setup menu, then use trackpad
to select option and soft key to change option.
Press ENTER to close menu, and CLEAR to to finish.
SYSTEM
SET UP¬
CHART
SET UP¬
TRACK
SET UP¬
GPS
SET UP¬
MENU Provi des access to setup options.
- Press to display
soft keys.
Press soft keys to toggle window on/off and to select
lower window.
Press ENTER to finish.
SELECT
WINDOWS
WINDOWS
OFF ON
DISPLAY
Controls display mode and windows.
- Press for display mode and soft keys display.
- Press again to toggle through display modes, then ENTER.
- Press and hold for 2 seconds for full screen display.
Press soft key to place waypoint at cursor or vessel, or display the
waypoint list and asscociated soft keys.
Press ENTER to finish.
MARKS / MOB Controls waypoints, and Man Overboard
function.
- Press to display waypoint soft keys.
- Press and hold for 2 seconds to activate or cancel MOB.
PLACE WPT
AT CURSOR
PLACE WPT
AT VESSEL
WAYPOINT
LIST
D4154-3
GOTO SCREEN
FIND SHIP
RANGE Controls chart scale.
Displayed vertical distances shown in the Status Bar.
- Press top of key to increase the chart distance.
- Press bottom of key to decrease the chart distance.
- Press and hold to change the scale faster.