Raymarine Lighthouse Sport 3.10 Series - Page 97

Menu item and description Options
Tides
Enables and disables display of Tide and Current graphics at
tide and current stations.
This setting is available when using Navionics® cartography.
• On
• Off
Community edits
Enables and disables display of crowd sourced data.
This setting is available when using Navionics® cartography.
• On
• Off
High res bathy
Enables and disables display of High Resolution Bathymetry
charts which provides improved bottom detail, contours and
structure.
This setting is available when using C-MAP® cartography.
• On
• Off
Sports fishing
Allows you to display easy-to-use information pages about
fishing locations including fish type, size, depth and reef and
bottom composition.
This setting is available when using C-MAP® cartography.
• On
• Off
Navigation mark symbols:
Determines whether International or US navigation mark
symbols are used.
This setting is always available and not dependent on the
cartography in use
.
• US
• International
Depths tab
Menu item and description Options
Shallow area:
Enables and disables identification of areas deemed to be
shallow. When enabled, a red hatched area is displayed in
areas shallower than the depth specified in the Zero to field.
This setting is available when using Navionics® cartography.
• On
• Off
Zero to:
Specifies the depth used for the shallow area setting.
This setting is available when using Navionics® cartography
.
0 ft to 60 ft (or equivalent units)
Deep contour:
Determines the depth at which the deep water color applies.
This setting is always available and not dependent on the
cartography in use
.
Numeric depth value.
Deep water color
Allows you to specify the color used to identify deep water.
This setting is always available and not dependent on the
cartography in use.
• White
• Blue
Record depth data
Enables depth and position data to be recorded to memory
card
This setting is available when using LightHouse™ charts.
• On
• Off
SD card:
When a suitable MicroSD card has been inserted the free space
available for recording depth data and R
ealBathy is displayed.
This setting is available when using LightHouse™ charts.
N/A
Waterline to tdcr:
Enter the distance between the waterline and your depth
transducer.
This setting is available when using LightHouse™ charts.
0 ft to 9.9 ft
Chart app
97