Raymarine RL70C - Clearing the Current Route

Chapter 5: Standard Chart Operations
95
SAVE ROUTE
1 EMPTY
2 EMPTY
3 EMPTY
4 EMPTY
5 EMPTY
YES NO
NAME ROUTE?
D4155-1
4. If you do not wish to name or re-name the route, press the NO soft key (or
ENTER) to clear the list. The route is saved and is listed as Route Not
Named.
If you wish to name the route press the YES soft key. Use the trackpad to
move the cursor right or left to the character you wish to edit. Then use the
top or bottom of the trackpad to increase or decrease the letter or number.
5. Press ENTER to finish and clear the Name List, or press CLEAR to cancel
the operation. To return to the default soft key display, press ENTER again.
Clearing the Current Route
You can clear the current route from the screen. When you select CLEAR ROUTE
if the current route has not been saved, you have the option of saving it and, if
you are following the current route, you have the option to stop.
➤ To clear the current route:
1. Press the ROUTE default soft key or place the cursor over a route leg until the
text RTE is displayed.
Press the CLEAR ROUTE soft key.
2. If you are following the current route the STOP FOLLOW soft keys are
displayed.
To cancel the CLEAR operation press NO.
To stop following and clear the route press YES.
Clearing the
Current Route
CLEAR
ROUTE
STOP
FOLLOW