110
HSB Series LCD Display
➤ To save and name the current track:
1. Press the TRACK LIST soft key. The track list pop-up and associated soft keys
are displayed.
2. The next available entry on the track list is highlighted.
(If required, you can use the trackpad to select another position in the list;
this can be a blank slot, or an existing track that you no longer require).
3. Press SAVE TRACK. The name track soft keys are displayed.
YES NO
NAME TRACK?
D4256-1
4. If you do not wish to name or rename the track, press the NO soft key (or
CLEAR) to clear the list. The track is saved and is listed as Track Not
Named.
If you wish to name the route press the YES soft key. Use the trackpad to
move the cursor right or left to the character you wish to edit. Then use the
top or bottom of the trackpad to increase or decrease the letter or number.
5. Press ENTER to finish and clear the Track List, then to return to the default
soft key display, press ENTER again or CLEAR.
Naming, Erasing and Showing a Track
➤ To name an existing track, erase a track or show a track, you select the track
from the track list, then press the appropriate soft key as follows:
1. Press the TRACK LIST soft key. The Track List is displayed. The grey
selection bar indicates the selected track.
Select the required track then press the appropriate soft key.
2. If you NAME a track, use the trackpad to move the cursor right or left to the
character you wish to edit. Then use the top or bottom of the trackpad to edit
the letter or number. Press ENTER finish the operation or CLEAR to cancel
the name.
3. If you ERASE a track you are prompted to confirm.
Press NO to cancel the operation, then ENTER if you wish to remove the
track list.
Press YES to erase the track from the list, then ENTER to remove the track
list.
4. If you SHOW a track, and you have a current track on screen, you are
prompted to save the track. Proceed as previously described in Clearing the
Current Track.
Alternatively, press the NO soft key to cancel the SHOW TRACK operation.
The track list is removed and the selected track is displayed.
Managing
Tracks
TRACK
LIST
NAME
TRACK
ERASE
TRACK
SHOW
TRACK
TRACK
LIST
To Next Page
Loading...
