98
HSB Series LCD Display
The soft keys allow you to toggle between ETA or total (elapsed) time, and
to change the Speed Over Ground (SOG) value used in the time
calculations. The current selections are highlighted.
➤ To change the SOG used for ETA calculations:
1. Press one of the PLANNED SOG keys to switch from actual to planned SOG.
2. Press the up or down PLANNED SOG keys to change the planned SOG value.
The Time values in the Route Information list are updated.
3. Press the ACTUAL SOG key to use the actual SOG value rather than a
planned one.
PLANNED SOG
0.0kn
TIME
ETA TOTAL
ACTUAL
SOG
1.0kn
INFO FOR ROUTE-CURRENT ROUTE
WPT POSITION BRG DISTANCE TOTAL TIME
°T nm nm ETA
01 50°21^97N --- 0.0 0.0 --:--
001°15^80W
02 50°21^97N 090 4.4 4.4 --:--
001°08^75W
03 50°27^48N 000 5.5 10.0 --:--
001°08^75W
D4264-1
4. Press ENTER to remove the Route Information window, then ENTER or
CLEAR to return to the route soft keys.
To return to the default soft key display, press ENTER .
Using the Route List to Erase and Name a Route
You can delete a route and you can re-name a route by selecting the route on the
route list.
➤ To select a route to delete or re-name:
Using the
Route List
To Next Page
Loading...
