.... _:_
HI-FI OUTPUT Provides volume-controlled stereo audio
output, meaningthe volume changes as you change volume
On the TV. The HI-FI OUTPUT jacks are ideal forconnecting the
TV to an amplifier that does not have its own volume control
Or remote.
SPEAKER SWITCH Lets you turn off the TV's internal (built-
in) speakers and play the audio through external speakers
connected to the TV. Set SPEAKER SWITCH to EXTERNAL to
play audio through external speakers: Setthe switch to
INTERNAL to play audio through the TV's internal (built-in)
speakers
REAR SPEAKERS The REAR SPEAKERS terminals let you
connect rear speakers to the TV.
FRONT SPEAKERS "The FRONT SPEAKERS terminals let you
connect front external speakers to the TV.
POLARITY SWITCH This TV has an extra-large color picture,
which makes it vulnerable to the effects of the Earth's
magnetic field. You may need to reset the POLARITY switch
and STRENGTH switches if you reposition the TV or move it to
a different room.
If you notice the picture tilting slightly, follow these steps to
correct the tilt:
1. Make sure the STRENGTH switch is set to OFF.
2. Move the STRENGTH switch to the LOW. If the picture gets
better, but not quite perfect, move the switch to HIGH.
3. If the picture gets worse, change the position of the
POLARITY switch. If the picture improves, but is not quite
perfect, move the STRENGTH switch to HIGH.
Remember to set the speaker
switch back to INTERNAL when
you are not using the external
speakers.
To connect an amplified
subwoofer to the TV, use the
left (UMONO) HI-FI-OUTPUT jack.
33
To Next Page
Loading...
