TV, VCR, AND DSS® RECEIVER
(CONNECTION G)
This information applies to Connection G inthe Connections
Foldout.
Conne'ction G provides:
• " stereo sound from broadcast programs
• stereo sound from VCR
• Picture in Picture (PIP)
• Watch one channel on TVwhile recording another
channel
To use this connection you must have:
• (4) coaxial cable
• (6) audio/video cables
• (1) S-Video cable(optional)
To connect:
1. Connect cables as shown in Connection G.
2. Return to First Things First, then follow the steps in the
Interactive Setup.
!OSING CONNECTION G
To watch TV programs:
1. Turn VCR and DSS® receiver off.
2. Press TV and tune to a channel.
To watch DSS" programming:
1. Press DSSoCABLE and tune to a channel.
To record off.air broadcasts and watch a different
channel:
I. Turn DSS® receiver_off.
2. Press VCRlandtuheto a channel.
.
4.
Begin recording.
To watch another channel, make sure the TV/VCR switch
on the VCR is set to TV; then press TV and tune to a
channel.
To play_atapeOnt:h_VCR: :-
1. Press VCR1 and then press PLAY.
BOX
See Connections Foldout,
Connection G
63
To Next Page
Loading...
