TV, VCR, DSS_ RECEIVER, AND LASERDISC
PLAYER (CONNECTION H)
This information applies to Connection H in the Connections
Foldout.
Connection H provides:
• stereo sound from broadcast programs
• stereo sound from VCR
* Picture in Picture (PIP)
, Watch one channel on TVwhile recording another
channel
To use this connection you must have:
• (4) coaxial cable
• (6) audio/video cables
• (1) S-Video cable (optional)
To connect:
1. Connect cables as shown in Connection H.
2. Return to First Things First, then follow the steps in the
Interactive Setup.
USING CONNECTION H
To watch TV programs:
1. Turn VCR and DSS®receiver off.
2. Press TV and tune to a channel.
To watch DSS" programming:
1. Press DSS•CABLE and tune to a channel.
To record off-air (cable or antenna) broadcasts and
watch a different channel:
1. Turn DSS® receiver off.
2. Press VCR1 and tune to a channel.
3. Press RECORD to begin recording.
4. To watch another channel, make sure the TV/VCR switch
on the VCR is set to TV; then press TV and tune to a
channel.
64
C_LE _OX
See Connections Foldout,
Connection H
To Next Page
Loading...
