69
THE COMPASS INDICATOR SPINS/DOES NOT HOLD
STEADY
Perform a compass/magnetometer calibration:
Connect the drone and the TAC.
Touch the MENU icon.
Select VEHICLE SETUP.
Select SENSORS.
Select COMPASS to calibrate the magnetometer.
Be ready to pick up and rotate the drone.
Click OK in the top right of the screen to begin.
The first tone from the Teal 2 will alert you to begin.
Follow the instructions on the TAC screen.
The second tone will prompt you to hold the drone
steady for the next orientation.
Select REBOOT VEHICLE when finished.
Due to known errata, it is recommended to
perform a power cycle (turn the drone battery
pack off and on again).
Establish connection between the TAC and the drone.
The compass or heading indicator on the TAC fly screen
will spin or drift instead of holding steady.
To Next Page
Loading...