REMBE Q-FlapCompact II - Spare Parts and External Documentation; Spare Parts Identification and Ordering

page 72 of 91 USB-QFLCII-14804/0
10 Spare parts
Spare parts
The most important spare parts are:
Flap
Gas spring lift assist for sizes >DN 630
Door sealing
Maintenance safety latch for sizes DN 630 and larger
Ball flange bearing
latch pin
Beveled pipe socket
Ball flange bearing
Level sensor (optional)
Closed-position sensor
Locking mechanism
Locking lever
Wear & Tear Sensor (Q-FlapCompact II Plus model only)
Spare parts ordering
Please contact REMBE
®
, Inc. or your local REMBE
®
, Inc.
representative for spare parts and service.
With a service agreement, you will receive extensive, rapid and reliable system
supervision by a REMBE
®
Certified Service Contractor. Contact your local REMBE
®
,
INC. representative or REMBE
®
, INC for more information.
NOTICE
If components wear out, the components or the entire inlet isolation device must
be replaced!
In the event that components wear out, the inlet isolation device should be replaced by
authorized, skilled personnel only. Otherwise, parts replacement should be performed by
authorized, skilled personnel only. Unless the inlet isolation device is repaired/replaced
by authorized professionals, we cannot guarantee its orderly function.
------------------------------------------------------------------------------------------------------------
Use original spare parts only
Gas spring lift assist for sizes>DN 630