page 14 of 91 USB-QFLCII-14804/0
WARNING
Any use other than those defined above is not intended.
The manufacturer is not liable for personal injuries or damage to the system result
ing
from non-compliance; In the event of non-compliance, the operator assumes the full
risk.
------------------------------------------------------------------------------------------------------------
Inadmissible use
The following is not allowed:
– Exhausting of substances for which the system has not been designed.
– Changing and rebuilding of the system by the customer without
permission.
– Any mode of operation which may affect safety.
2.4 Personnel qualification
Skilled Personnel Only trained personnel may operate the inlet isolation device. The operator must
have proper qualifications, competence, and responsibility for any work to be carried
out must be clearly defined.
Only skilled personnel are authorized to perform the commissioning and servicing of
the system, preferably trained by the REMBE®, Inc. Service Consultant. Definition of
skilled personnel: personnel who have extensive knowledge of below-mentioned
regulations, directives and standards because of their specialized training and
experience with
• relevant local (including plant), state and national safety regulations
• relevant local (including plant), state and national accident prevention regulations
• basic knowledge of air technology
• basic knowledge of electrical engineering
• directives and acknowledged state-of-the-art technology doctrines (e.g. VDE
directives, DIN standards, NFPA standards, other local, state, national, plant
regulations)
Skilled personnel must:
• be able to analyze the work he/she has been assigned to, identify and avoid
possible risks and hazards; and
• be authorized by the person responsible for machine safety to perform the
required tasks.
Inspection by qualified
personnel Depending on national, and local, laws, regulations, guidelines and standards, the
installation location, conditions, and grounding may have to be checked by
qualified personnel at commissioning and regularly thereafter.
Systems with combustible dust explosion risk need to be checked by experts having
suitable qualifications.
To Next Page
Loading...
