Renesas RH850/F1K Series User Manual

A-1
Revision History
Rev.
Date
Description
Section
Summary
0.10
2015-08-26
-
Initial version
0.50
2015-12-17
-
Typing error correction
-
RH850/F1K Group name adjusted
Target
Device
RH850/F1K-100 ECO removed according to RH850/F1K
Hardware user’s manual
3.1.1
MOSC value adjusted according to RH850/F1K Hardware
user’s manual
4.3.1
Recommended connection of unused pins updated
5.3
ADC equivalent input circuit values changed to tbd
6.1
 Adjusted pull-down resistor value ofP10_8/FLMD1
from “4.7k to 10kΩ” to “1k to 10kΩ”
 Description added that normal operating mode is
assumed for the development tool interface
6.1.1
Added EVTO / JP0_6 in table 21
6.1.4
Description added regarding support of 1pin LPD and flash
programming by UART
6.1.5
Corrected component naming
6.2
Adjusted pull-down resistor value ofP10_8/FLMD1 from “4.7k
to 10kΩ” to “1k to 10kΩ”
7
Reference document updated
1.00
2016-08-04
-
Typing error correction
1.1.4
Figure of power up/down timing corrected
2
Added “in normal operation mode” for easier understanding
2.1
Adjusted minimum value of R3 to 86kΩ
4.1.2
Added “and the minimum RESET pulse rejection” in reference
to RH850/F1K hardware user’s manual
4.3
Adjusted Notes and corrected related Note for JP0, JP0_3 and
JP0_4 in table
Corrected description of X1
Adjusted description for XT1 and IP0_0/XT2 and added Note 4
5.3
ADC equivalent input circuit added

Renesas RH850/F1K Series Specifications

General

Brand	Renesas
Model	RH850/F1K Series
Category	Power Supply
Language	English