To Next PageTo Next Page
Need help?Do you have a question about the Renesas RH850/F1K Series and is the answer not in the manual?
General| Core Voltage | 1.2V |
|---|---|
| Operating Temperature Range | -40°C to +125°C |
| I/O Voltage | 3.3V, 5V |
| Power Consumption | Depends on operating mode and configuration |
| Voltage Regulator | Integrated |
| Current Consumption | Depends on operating mode and configuration |
Details power supply pin overview, configuration, architecture, and timing for RH850/F1K group.
Guidance on capacitor placement at REGVCC for EMI optimization during data flash operations.
Lists essential external connections and components required for RH850/F1K operation in normal mode.
Details recommended circuits for main and sub oscillators, including component guidance.
Provides general guidance for PCB layout of oscillator circuits.
Covers minimum RESET circuit, its components, and input characteristics like analog noise filtering.
Explains I/O pin behavior during reset, specific pin functions, analog filters, and low power modes.
Discusses recommended connections for unused pins and pin assignment differences across variants.
Explains ADC conversion timing parameters and provides an overview table.
Covers equivalent input circuits, external circuits, and wait times for ADC inputs.
Details debug (1pin LPD, 4pin LPD, Nexus) and flash programming interfaces.
Illustrates combined debug and flash programming interface connections.
Describes debug/flash interfaces when using internal HSOSC as clock supply.
Addresses considerations for hot plug-in debugging, including reset and power monitoring.
Explains boundary scan test compliance and necessary connections.
