17
Safety plates and covers make it impossible to come into direct contact with most of the
danger zones. Warnings are given in this manual relative to specific dangers in each zone.
These warnings are repeated on the safety covers (see Figure 2.4). The dangers existing
within each zone are explained in Table 2.
Table 2 Explanation of the danger symbols
Danger of death! High voltage
Live parts that can lead to electrocution.
Work on the switch box may only be carried out by an authorized
electrician.
control cabinet (6), main motor (7), longitudinal cutter motor (5),
and vacuum pump (9).
DANGEROUS! Rotating parts.
Among other things, rotating parts can crush limbs.
Approach rotating parts only when the machine is turned off.
Do not wear loose clothing.
Do not wear chains.
Do not have your hair long and loose.
Do not interfere with the lifting equipment.
forming station (2), sealing station (3), film infeed (1), transport
chains (10), longitudinal cutter (5), conveyor belt (11), chain drive
(7)
DANGEROUS! Component closes
Parts that close forcefully and can amputate limbs
Never interfere with the machine when it is turned on.
Never remove the safety covers and never shut them down.
Lifting equipment (8), longitudinal cutter (4).
To Next Page
Loading...