Repak RE20 - Page 18

18
Meaning
DANGEROUS! Rotating blades
Danger
(Rotating) blades can cause cuts or amputate limbs.
Recommendation
Do not carry out any activities within the reach of the blades.
Never take hold of blades by the cutting edge.
Always place blades in a safe place.
NB! The sealing die bottom part has blades on the gas channels.
Always take hold of the blade shaft of the longitudinal cutter on the
outside.
During maintenance work always place the blade shaft in the
protective cover supplied.
Can be found in:
longitudinal cutter (4), longitudinal cutter (5), sealing station (3).
Meaning
DANGEROUS! Hot surface
Danger
Hot components can cause serious burns.
Recommendation
After the main switch has been turned off, hot components need a
considerable amount of time to cool down (approximately 1 hour).
Wear protective gloves.
Take hold of hot components by the edge and place them in a safe
place.
Can be found in:
sealing die bottom part (3), sealing die top part (3), forming die top
part (2).