© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197
| support@rgblink.com | www.rgblink.com
1. If use network cable to directly connect camera to mini-edge, mini-edge can only control one
camera. The current IP address and IP address set before can be captured.
2. If devices are connected to same LAN, rotate ENTER knob to move the cursor to icon, press
the knob once again, and mini-edge can capture current IP address and IP address set before of
all cameras in the LAN. Select the IP address of the camera to be controlled in Search IP Interface.
Use Toggle on the front panel to adjust focus.
Automatic focus adjustment can be achieved by choosing AUTO.
Use 5-direction Joystick to adjust position of camera.
To Next Page
Loading...
