4.1 INTRODUCTION 36
4.2 LCD SCREEN 36
4.2.1 START PAGE / MEASURED VALUES 36
4.2.2 MAIN MENU 37
4.2.3 DECAY TIME 37
4.2.4 BACK-LIGHT 37
4.2.5 ACCESS CODE 38
4.2.6 ADVANCED FUNCTION 38
4.2.7 LIQUID SELECT 38
4.2.8 CHECK FUNCTION 39
4.2.9 OUTPUT MA RANGE 39
4.3 HART COMMUNICATION 40
4.3.1 SETTING THE PRIMARY VARIABLE / ASSIGNING 4-20MA OUTPUT 40
4.3.2 CONFIGURE 4-20 MA OUTPUT 41
4.4 USB-PORT 43
4.4.1 CONFIGURATION 43
5. CALIBRATION LCD SCREEN 45
5.1 CALIBRATION MENU 45
5.1.1 SET TEMPERATURE 45
5.1.2 S.G. X 1000 CALIBRATION 45
5.1.3 FIELD CALIBRATION 47
6. MAINTENANCE 48
6.1 REPLACING / MOUNTING A SENSOR 48
7. DIAGNOSTICS & SERVICE 51
7.1 DIAGNOSTICS MENU 51
7.1.1 SYSTEM STATUS 51
7.1.2 RESTORE CALIBRATIONS 51
7.1.3 SET CLOCK AND DATE 52
7.1.4 LOGGING AND SETTINGS FOR DIAGNOSTICS & EVALUATION 52
7.1.5 COLLECT LOG DATA USING USB 53
7.1.6 ERASE LOG 54
8. DISTRIBUTORS CALIBRATION (FOR RHOSONICS AND DISTRIBUTORS ONLY) 55
8.1 USB-PORT (ONLY DISTRIBUTORS AND FACTORY) 55
8.2 MA TRIMMING 56
8.3 TEMPERATURE 56
8.4 SGX1000 CALIBRATION 58
8.4.1 SGX1000 OFFSET CALIBRATION 58
8.4.2 SGX1000 SPAN CALIBRATION 59
9. TECHNICAL SPECIFICATIONS 60
To Next Page
Loading...
