Rhosonics SDM-4 - SDM Sensor; Spool; Weldolet; Wafer

SDM – Slurry Density Meter
61 www.rhosonics.com
TECHNICAL SPECIFICATIONS
9.3 SDM sensor
Wetted parts:
(Alloyed) Silicon nitride Si3N4
Duplex Steel ASTM/ASME: A240 UNS S32205/S31803
EURONORM: 1.4462 X2CrNiMoN 22.5.3
AFNOR: Z3 CrNi 22.05 AZ
DIN: W.Nr 1.4462
ISO: 4462-318-03-I
BS: 318S13
SS: 2377
JIS: SUS 329J3L
9.4 Spool / Weldolet / Wafer
Specific dimensions:
 Spool: Diameters up-to 30” (NW 750 mm)
 Weldolet:
o SDM-2 up to wall thickness 17 mm
o SDM-3 wall thickness 17-39 mm
 Wafer: Diameters up-to 60” (NW 1500 mm)
Please contact Rhosonics for exact dimensions. All is depending on the pipe schedule and flange
specifications.