Rhosonics SDM-4 - Default Chapter; Table of Contents

SDM – Slurry Density Meter
2 www.rhosonics.com
TABLE OF CONTENTS
1. PREFACE 5
1.1 PURPOSE 5
1.2 SYMBOLS AND CONVENTIONS 5
1.3 ABOUT THIS MANUAL 5
1.3.1 CONVENTIONS 5
1.4 DOCUMENT ISSUE 6
2. INSTALLATION 6
2.1 INTRODUCTION 6
2.2 SELECTING THE SDM LOCATION 9
2.2.1 VERTICAL PIPE MOUNTING 10
2.2.2 HORIZONTAL PIPE MOUNTING 10
2.2.3 ANALYZER HEAD ROTATION 11
2.3 INSTALLATION OF THE SPOOL (SDM-1) 12
2.3.1 SEALING MATERIAL 12
2.3.2 GASKET SEALING 12
2.3.3 BOLTING PATTERN AND TORQUE 12
2.3.4 INSTRUCTIONS 13
2.3.5 4 AND 8 BOLT FLANGES 13
2.3.6 12 BOLT FLANGES AND MORE 13
2.4 WELDOLET INSTALLATION (SDM-2 OR SDM-3) 14
2.5 INSTALLATION OF THE WAFER (SDM-4 OR SDM-5) 15
2.5.1 WAFER (UHMWPE) 16
2.5.2 WAFER (METAL, I.E. AISI 316) 19
2.6 INSTALLATION OF THE SDM TO THE PROCESS ADAPTOR 19
2.7 ELECTRICAL CONNECTIONS SDM 19
2.7.1 USB PORT 21
2.7.2 CONNECTION 24 VDC POWER AND HART 21
2.7.3 HART INSTALLATION CONFIGURATIONS 23
2.7.4 HART CONNECTING THE SECONDARY MASTER TO THE ANALYZER 24
2.7.5 CONNECTION USB-PORT TO A PC 26
3. OPERATION 28
3.1 INTRODUCTION 28
3.1.1 FUNCTIONALITY PER USER INTERFACE 29
3.2 LCD SCREEN 30
3.2.1 SCHEDULE OPERATION LCD SCREEN 30
3.2.2 CONVENTION 31
3.2.3 STATUS ANALYZER 32
3.3 OPERATION VIA HART 34
3.4 USB-PORT 34
3.4.1 SOFTWARE UPDATE 34
3.4.2 RHOSONICS SERVICE APPLICATION (RHOSONICS SA 9D) 35
4. CONFIGURATION 36