Rhosonics SDM-4 - SGx1000 Calibration

SDM – Slurry Density Meter
58 www.rhosonics.com
DISTRIBUTORS CALIBRATION (FOR RHOSONICS AND DISTRIBUTORS ONLY)
8.4 SGx1000 calibration
8.4.1 SGx1000 offset calibration
 Press SG offset calibration
 Enter a certified SGx1000
Enter Certified SGx1000
 A button Calibrate will appear on the screen
Calibrate button
 Press Calibrate and wait 30 seconds (averaging time)
 Lamp Calibrating turns into bright green
Calibrating SGx1000