Ricoh 5510L - G4 Internal Switch Programming (Function 17); G4 Parameter Switch Programming (Function 17)

SERVICE LEVEL FUNCTIONS 14 June, 2002
5-12
5.1.27 G4 INTERNAL SWITCH PROGRAMMING (FUNCTION 17)
1. Enter the Service Mode.
2.
$ &
)
3.
%)
The default settings are shown on the
top line, and the current settings on the
bottom.
4. Increment bit switch: !
Decrement bit switch:
"
Example:
Display bit switch 3: : ! 3 times
5. Adjust the bit switch.
To adjust more bit switches: go to step 4.
To finish: " &
5.1.28 G4 PARAMETER SWITCH PROGRAMMING (FUNCTION 17)
1. Enter the Service Mode
2.
$ &
3. $
The default settings are shown on the
top line, and the current settings on the
bottom.
4. Increment bit switch:
!
Decrement bit switch:
"
Example:
Display bit switch 3: ! 3 times
5. Adjust the bit switch.
To adjust more bit switches: go to step
4.
To finish: " &
)
H310S534.BMP
H310S601.BMP
H310S602.BMP
H310S604.BMP
H310S605.BMP