Ricoh 5510L - By-Pass Tray

PRINTER 14 June, 2002
6-26
By-pass Tray
By-pass Tray Guide Plate
Raise the gray lever [A] to lower the by-pass guide plate [B] and release it.
Press down the lever to raise the guide plate so it presses against the bottom of
the stack.
By-pass Tray Paper Size Detection
Paper size detection for the by-pass tray is set manually. The operator simply
rotates the dial [A] to the correct setting for the size of the paper loaded in the by-
pass tray.
H310D010.WMF
H310D011.WMFF
[A]
[B]
[A]