Ricoh 5510L - Paper Size Detection

14 June, 2002 PRINTER
6-23
Detailed
Descriptions
Paper Size Detection
Paper Size Detection (Standard tray)
Paper Size SW1 SW2 SW3 SW4
No Tray OFF OFF OFF OFF
Folio ON ON OFF OFF
LT LEF OFF OFF OFF ON
LG SEF OFF ON OFF ON
A4 SEF ON ON OFF ON
F OFF OFF ON ON
A3 ON OFF ON ON
LT SEF OFF ON ON ON
DLT ON ON ON ON
LEF: Long Edge Feed
SEF: Short Edge Feed
NOTE: LEF and SEF in this table are with relation to the direction of paper feed
(“long edge feed” means that the long edge is going into the machine first).
They do not refer to the decals on the trays.
Paper size detection is based on the four paper size switches [A] on the main unit,
which detect the setting of the paper size dial [B] on the paper tray.
The paper size dial has grooves and ridges on the side facing the paper size
switches. Each switch turns off when it falls into a groove, and turns on when a
ridge presses it.
H310D942.WMF
1
2
3
4
H310D931.WMF
[B]
[A]