Ricoh 5510L - Function Upgrade Unit Type 510

14 June, 2002 INSTALLING OPTIONAL UNITS
1-17
Installation
1.3.6 FUNCTION UPGRADE UNIT TYPE 510
1. Remove the upper cover [A] (2 screws).
2. Remove the bracket cover [B] (4 screws) as
shown.
3. Insert the Function Upgrade Unit [C]
into CN3 on the OPIF board [D].
4. Replace the bracket cover and upper
cover.
5. Plug in the machine and turn on the
main power switch.
6. Print the System Parameter List from
inside Service mode, and make sure
that “FUNCTION BOARD” is listed as
an option. Then exit Service mode.
H214I006.WMF
H214I523.WMF
H214I041.WMF
[B]
[D]
[A]
[C]