14 June, 2002 DATA OR FIRMWARE DOWNLOAD/UPLOAD
3-45
Replacement
Adjustment
3.10 DATA OR FIRMWARE DOWNLOAD/UPLOAD
!
CAUTION
1. Make sure to turn the power off before inserting the IC card.
2. If the optional 40MB memory card (feature expander or fax on demand)
is installed, make sure to re-install it before turning the power on in
Step 7 below. Otherwise, programmed data may be lost.
If copying the firmware onto an IC card beforehand with MCE (Memory Card
Explorer),.please confirm that the start address and firmware file are as follows:
Firmware Start address Firmware file type
MBU (FCU) 0H *. bin
SG3
SiG4
NIC-F
JPEG
200000H *. rdt / *. mdt
To Next Page
Loading...
